Spot 2800W Electric Radiant Heater
No Aggressive Red Light - Produces
a very ambient modest light
HEATSCOPE® Spot radiant heaters produce a subtle orange glow which is only 30-40% of the light output of the traditional radiant heaters. The reduced light output is due to the use of a color matching grill screen in front of the satin surface carbon heating elements that can be either a black or white. They are midwave radiant heaters that produce heat almost instantly (less than 15 seconds) and are ideal for providing heat to outdoor areas such as partially open patios or balconies.
Configure & Buy
Buy online and get it delivered to your door.Downloads
Customer Inspiration #maddesigngroup
Key Features
Efficiency Made Simple
HEATSCOPE® is committed to efficiency! All VISION, SPOT and PURE radiant heaters were developed in accordance with the newest findings concerning the mid-wave IR range. This means that between 90% and 94% of the energy used is turned directly into ambient heat.
Real Infrared
All HEATSCOPE® design radiant heaters produce natural infrared heat in the (fast) mid-wave IR range. This means that the heat feels particularly pleasant and is effective exactly where it is needed – that’s directly under the first layers of skin, but not too deep in the tissue.
Inviting & Cosy
Other radiant heaters use light tubes to produce heat as a by-product – at HEATSCOPE® we exclusively use innovative carbon technology: two carbon spirals are powered with an electric current, they begin to glow and produce a particularly pleasant warmth.
Super Fast
Output peaks are a thing of the past with HEATSCOPE® power heaters. Although the heaters start up slowly, they reach 100% in no time: the range of SPOT models take only 15 seconds, and the VISION & PURE range takes a maximum of 30 seconds owing to the glass front.
Award-winning Design
Delivers pleasant heat without the distraction. Clean-cut, modern designs and colours easily blend into any decor.
Weather-Resistant
All models are certified with an IP rating for protection against dust, splash-water, and wind.
No Aggressive Red Light
Produces a very ambient, modest light based on double carbon heating elements.
High Efficiency
Up to 94% of the energy used is turned into ambient heat and transferred directly to nearby people and surfaces for maximum efficiency.
Smart Switch
Operate and sync your heater(s) with your smart device (compatible with Alexa and Google Assistant). *Internet connection and additional accessories required
2-Year Warranty
Our radiant heaters come with an industry leading two-year limited warranty.
Technical Specifications
Construction
- MPN (Black) MHS-SM2800AB.100
- MPN (White) MHS-SM2800WT.100
- Weight 4.5kg [9.9lb]
- Model Dimensions mm [in] L 884mm [34.8in] W 184mm [7.2in] H 78mm [3.1in]
- Application Indoor & Outdoor
- Materials Aluminium body, glass ceramic front
- Colours
Accessories
Includes everything you need to easily operate and protect your investment for many years to come.
FAQ's
View AllHow many amperes does HEATSCOPE® radiant heaters draw?
- Spot – 12.17 amps at 100% power
- Vision – 13.91 amps at 100% power
- Pure – 13.04 amps at 100% power
What is the minimum height clearance required?
The lower edge of the heater must be at least 1800mm from the ground for wall mounted installations, and 2000mm for ceiling mounted.
How do I clean my HEATSCOPE® heater?
To clean the appliance, you will need to disconnect the radiant heater from the power supply at least 1 hour after operation. Make sure the heating elements are not glowing anymore before you do this. To wipe off any dirt or dust to the exterior housing, only use a soft damp cloth.
Can my radiant heater be installed near a power outlet?
The heater must not be installed directly below a power source/socket, and the sides of the unit must be at least 20cm from the nearest power source. For further details, please refer to the installation manual.
How do I replace the carbon element fibres of my HEATSCOPE® heater?
Changing the carbon fibre elements of the HEATSCOPE® heater must not be done by yourself. You will need to engage a licensed electrician to perform the service.
Can I cover my HEATSCOPE® heater?
No, never cover the appliance nor enclose it with insulating or similar materials. Adequate ventilation surrounding the heater must be ensured at all times.
What type of heating waves does a HEATSCOPE® radiant heater produce?
HEATSCOPE® heaters work in the medium wavelength producing a very pleasant warmth and barely any perceptible light - especially with Pure and Vision models. The Spot model works with the fast medium wave, this means it will heat quicker and with a touch of more light. It’s the best option for outdoor spaces where there is more movement of air.
What type of infrared waves are produced by other heaters available in the market?
Other infrared heaters work with short waves, and produce heavy red light with an unnatural, uncomfortable heat.
You May Also Like
Radiant Heaters
Pure+ 3000W Electric Radiant Heater
Heatscope Heaters $2,525.00 The previous concept for infrared radiant heaters has been turned upside down and thought of in a completely new way.
Vision 3200W Electric Radiant Heater
Heatscope Heaters $2,595.00 Vision is characterized by its extremely restrained, slightly orange-coloured ambient light.How Can We
Help?
Step-by-step guidance to find the right solution for your needs, trade professional benefits, and ongoing support before and after your purchase.
Live Chat-
Project Assistance
From product selection, to material sourcing, and project reviews, our team is here to help.
-
Dedicated Support
Our unparalleled support and versatile product range makes designing with fire simpler than ever.
-
1-on-1 Screenshare
Can't make it to our showroom? Book an online consultation with our team of specialists.
-
Business Programs
Smart pricing, personalised support and unparalleled creative freedom.
-
Exclusive Pricing
Enjoy exclusive discounts across our entire range of fireplaces and fire pits.